Friday, July 8, 2011

In progress vinyl fence - DIY Home Improvement, Remodeling ...

I have a retainer wall that is about 3 blocks high from the ground. I already did about half the work but still unsure if I did it correctly.

On the block that I needed a post in which it already had concrete, I used a 3/8" (3" 3/4 long) wedge anchor and a post bracket. My wood post is only 4 feet high (the vinyl post is 6 ft).

On the block that didn't have concrete, I filled the block up with concrete 2 blocks deep and used 24" rebar. I then placed a 4" inch hex bolt with a washer into the concrete. I should used the anchor bolt with the "j" or other better methods?

Btw, I am in socal.

Remaining :


Last edited by tractng; Today at 01:12 PM.

Source: http://www.houserepairtalk.com/f45/progress-vinyl-fence-11655/

winklevoss twins playlist oil prices nba draft 2011 iea iea merriam webster

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.